Integrated Range

FLXBL80-600-ELC

Integrated BLDC servo motor with CANopen interface

Power 628 W

Rated Torque 1,5 Nm

Peak Torque 4,5 Nm

Rated Speed 4000 RPM

Technical Specifications

Reference Comparison

Specifications	FLXBL80-600-ELC-N	FLXBL80-600-ELC-B
Technical Data
Rated voltage	48 V	48 V
Rated power	628 W	628 W
Rated speed	4000 RPM	4000 RPM
Rated current	17 A	17 A
Peak current	51 A	51 A
Rated torque	1,5 Nm	1,5 Nm
Peak torque	4,5 Nm	4,5 Nm
Torque constant	0,088 Nm/A	0,087 Nm/A
Voltage constant	6,5 V/krpm	9,0 V/krpm
Resistance line-line	0,087 Ω	0,11 Ω
Inductance line-line	0,41 mH	0,41 mH
Number of poles	10	10
Rotor moment of inertia	0,7 kg.cm²	0,7 kg.cm²
Flange	80 mm	80 mm
Motor body length	140 mm	170 mm
Motor weight	1900 g	2500 g
Controller & Interface
Main supply range	12-75 VDC	12-75 VDC
Nominal supply	48 VDC	48 VDC
Communication	CANopen, USB configuration	CANopen, USB configuration
CANopen network	Up to 127 stations	Up to 127 stations
Digital inputs	3 opto-isolated, configurable	3 opto-isolated, configurable
High-speed capture	5 minimum pulse width in latch/capture mode µs	5 minimum pulse width in latch/capture mode µs
Digital outputs	2 opto-isolated outputs	2 opto-isolated outputs
Output supply / current	12-30 VDC, up to 30 mA	12-30 VDC, up to 30 mA
Analog input	1 differential, ±10 V	1 differential, +/-10 V
Analog resolution	12 bit	12 bit
STO input	12-28.8, nominal 24 VDC	12-28.8, nominal 24 VDC
Protection functions	Short-circuit, over-current, over/under-voltage	Short-circuit, over-current, over/under-voltage
Operating temperature	-10 to +40 °C	-10 to +40 °C
Humidity	<85, non-condensing %RH	<85, non-condensing %RH

Mechanical Integration & Performance

Dimensions

Dimensions

Performance

Identification